ELDAN MPR200T - 4.3.1 Setting: Water

Eldan Recycling A/S Page 21
4.3.1 Setting: Water
The Water setting is used to reduce the temperature of the MPR.
The value is set in degrees Celsius or Fahrenheit. When the temperature falls
below the set value, the water supply to the MPR will stop. When the
temperature exceeds the set value, the water supply to the MPR will be
restored.
Adjustment
Water Tem
p
erature
Press F (Fahrenheit) or C (Celsius).
Then press the number for the temperature units that have been selected, F
or C.
When you press the number, a keyboard will appear. You can then enter the
value.
Setting range for Fahrenheit
32-212
o
F
Setting range for Celsius 0-
100
o
C
0
F
0
C
Setting
Fahrenheit
Setting
Celsius