2. SAFETY INSTRUCTIONS
It is a condition that the person, who is going to operate the machine, has
been educated or is familiar with machines of the same type.
Ordinary safety rules : The ordinary safety rules of the country in
question must always be obeyed.
Before starting, check that:
All protection devices are placed correctly.
Check conveyors for left tools, screws, bolts, etc.
The operator must be absolutely certain that no service, repair or any
other kind of work on the machine is being undertaken before start-
ing the machine.
The machine is to be adjusted according to the directions in the
manual.
Check the starting procedure in the manual.
During operation:
Do not feed objects into the machine, which may cause damage to
the machine.
Safety during operation:
Never try to remove jammed material or foreign bodies in the rotor
house, etc. until it has been checked that the machine is fully iso-
lated electrically. This means turn off and lock all main switches be-
fore working on the machine.
ELDAN Recycling A/S Page 4
To Next Page
Loading...