When the machine is not delivered with special silencing equipment,
operators must carry earplugs or hearing protectors.
Before the operator begins greasing/maintenance work on the
machine the following precautions should be followed:
In case of stops for maintenance, damage etc. turn off and lock all
main switches before working on the machine. Repair and mainte-
nance work must not be carried out before the machine has been
brought to a complete stop.
After the machine has been stopped there is a caster time of approx.
1 minute. Do not touch rotor and other rotating parts before the ma-
chine has been brought to a complete stop.
Working on the machine, opening of inspection doors or removing
protection screens and safety devices while the machine is operat-
ing, is absolutely prohibited and highly dangerous.
When opening or closing the machine nobody but the operator must
be on or near the machine.
Personal security when carrying out service:
Electrical installations and repairs must only be carried out by
authorised personnel.
The processing area must be satisfactory illuminated so that there are
no dark corners. Illumination must however not be dazzling. The sup-
ply must not be taken from the machine as this must be disconnected
during service work.
It is dangerous to climb the machine. Always use a platform or a step-
ladder where service from the ground is not possible.
ELDAN Recycling A/S Page 5
Dust masks are necessary when cleaning the machine.
To Next Page
Loading...