6.6 Exchange of the flying knives
Disconnect the main current by maintenance work, repair etc.
Lock the main switch by maintenance work, repair etc.
It is absolutely prohibited and highly dangerous to open the machine
before it has been brought to a complete stop.
When starting the machine, check that no persons or foreign bodies
are inside the rotor housing or on the inlet conveyor (or any other
kind of feeding device).
Use gloves for hand protection by maintenance work etc. The ma-
chine can be very hot after continuous operation.
When replacing the knives the use of safety glasses is necessary,
because of the danger of splinters when the knives are exposed to
strokes and bumps.
ELDAN Recycling A/S Page 30
To Next Page
Loading...