7.0 Introduction
To enable you to get the best from your ELDAN machine it is essential
that it is operated correctly.
Therefore the operational manual tells you about start and stop proce-
dures, the function and operation of the control desk. The operation
procedures tell you about safety statements and operation information.
7.1 Safety statements
Before starting the machine, check that all protection devices
works and are correctly adjusted.
When lifting/transporting the machine use the lifting hooks
placed on the machine.
Before starting the machine check that no persons or foreign
bodies are inside the rotor housing or on the inlet conveyor (or
any other kind of feeding device)
When opening/closing the machine absolutely nobody, but the
operator must be in or near the upper part, the rotor housing and
movable parts.
When opening/closing the machine the operator must be abso-
lutely sure that nobody is on or near the machine.
When starting the machine, check that no persons or foreign
bodies are inside the rotor housing or on the inlet conveyor (or
any other kind of feeding device)
In emergency situations use the emergency stops.
Oil leaks from hydraulic tubes or pipes may come with such a
force that the oil may penetrate the skin.
ELDAN Recycling A/S Page 45
To Next Page
Loading...