Attention: after the machine has been stopped there is a caster
time of approx. 1 minute. Do not touch rotor, flywheel etc. before
these are completely stopped. Maintenance work, repair etc.
must not be carried out before the rotating parts of the machine
have stopped completely.
It is absolutely prohibited and highly dangerous to open the ma-
chine before it has been brought to a complete stop.
It is absolutely prohibited for unauthorised personnel to work
with current-carrying wires even though the main switch has
been turned off and locked.
Disconnect the main current by maintenance work, repair etc.
Lock the main switch by maintenance work, repair etc.
Before connecting the main current, check that nobody is work-
ing on the machine.
Before starting the motor, check that the motor rotates in the cor-
rect direction. This is indicated by an arrow on the motor. The di-
rection of rotation must only be altered by authorised personnel.
Use gloves for hand protection by maintenance work etc. The
machine can be very hot after continuous operation.
It is recommended to use earplugs or hearing protectors to avoid
damage of the hearing.
Check that the alarm signal always works.
There is danger of explosion and fire if the electrical cabinet is
not kept free of dust.
ELDAN Recycling A/S Page 46
To Next Page
Loading...