Eldan Recycling A/S Page 23
4.3.3 Setting: MaxMax. Temperature
The Max. Temperature MPR setting is used to stop the inlet and the outlet
conveyor of the MPR. If the temperature is greater than the set value, the inlet
and the outlet conveyor will stop. There will also start an alarm. It will then only
be possible to restart the conveyor when the temperature has fallen below the
set value. The MPR will stop if the temperature remains above the set value for
more than 10 minutes.
4. Press F (Fahrenheit) or C (Celsius).
5. Then press the number for the temperature units that have been selected,
F or C.
6. When you press the number, a keyboard will appear. You can then enter
the value.
Setting range for Fahrenheit
32-302
o
F
Setting range for Celsius
0-150
o
C
Setting
Fahrenheit
Setting
Celsius
To Next Page
Loading...