The processing area must be satisfactory illuminated so that
there are no dark corners. Illumination must, however, not be
dazzling. The supply must not be taken from the machine as this
must be disconnected.
Use gloves for hand protection by maintenance work etc. The
machine can be very hot after continuous operation.
When cleaning the machine it is necessary to use dust masks.
When replacing the knives the use of safety glasses is necessary
because of the danger of splinters when the knives are exposed
to strokes and bumps.
Oil leaks from hydraulic tubes or pipes may come with such a
force that the oil may penetrate the skin. In such cases a doctor’s
help should be sought immediately in order to prevent severe in-
fections.
When the operator has fini shed the greasing/maintenance
work on the machine the follo wing precautions should be fol-
lowed:
Before connecting the main current, check that nobody is work-
ing on the machine.
Before starting the machine check that all protection devices
works and are correctly adjusted.
Before starting the machine check that no persons or foreign
bodies are inside the rotor housing or on the inlet conveyor (or
any other kind of feeding device).
ELDAN Recycling A/S Page 22
To Next Page
Loading...