Operating manual - Fan CF-C Transport and storage
2004930 10.19/0.2 www.elektror.com 29 of 84
EN
Risk caused by lifting and transporting in an inappropriate way
The result of lifting and transporting the fan components in an
inappropriate way may be injuries and destruction of these
components.
Use only hoists, slings and fasteners with sufficient load capacity.
For transporting and lifting the fan, use the holes provided for this
purpose for transport lugs, slings and fasteners which should be in
perfect condition. It is possible to fasten only in the intended fixing
points of the transport lugs.
Do not tie wire ropes and chains.
Do not connect ropes by binding them.
Twisted ropes should be straightened before lifting.
Do not allow ropes to bend sharply.
Make sure that thimbles, rope eyes, rings and other elements of the
slings are freely movable on the hooks.
Do not carry loads over people.
Any auxiliary lugs, for example at the drive, etc. are only suitable for
suspending individual components.
Lifting and transporting
When lifting and transporting the fan, comply with applicable accident prevention
regulations and generally recognized technical rules.
After unloading the fan:
−
Remove the packaging (according to the transport version).
Check the fan in order to exclude damage.
Check the accessories for compliance with the delivery note to confirm completeness.
Move the fan to the place of installation or to the warehouse only by appropriate means of
transport.
If transported to the place of installation by truck:
The fan should be lifted with a suitable lift onto the loading surface.
The fan must be secured against slipping / falling using appropriate fasteners (e.g. ropes,
belts, chains).
Load lashing points
Load lashing points
− For transporting and lifting the fan, use the tools and
transport lugs provided for this purpose.
The slings should only be attached to the transport
lugs.
The slings should be fixed carefully so as not to
damage the components of the device.
Do not attach slings to drive components. It is possible
to damage the fan, which excludes manufacturer's
warranty.
To Next Page
Loading...