134
To reveal all hidden segments in the
design, click Show All .
To show design detail information for
all segments in the design, click Show
Details (toggles on/off). When the
Show Details tool is off, detailed
information will be reorganized and
associated segment pictures will be
reduced in size. You will be able to
see more segments at once in the
Sequence View dialog.
3 To perform design editing on a color group
or a segment, do one of the following:
Right-click a color layer bar or a
segment and make a selection from
the menu.
Click a color layer bar or a segment at
the start of your selection. Press Shift
on your keyboard while you click the
color layer bar or segment at the end
of your selection. To extend the range
of selected color layer bars or
segments, press Shift again or
Shift+CTRL while you click any of
them outside the range already
selected. Then right-click and make a
selection from the menu.
Click a color layer bar or segment.
Press CTRL on your keyboard while
you click each color layer bar or
segment not already selected. Then
right-click and make a selection from
the menu.
4 Double click color layer bars to collapse
and expand a color layer.
For example, the Needle 3 layer bar was
expanded in the picture above. You can
view all of the segments for Needle 3.
5 Click and drag segments in Sequence
View to resequence segments.
6 To hide a segment on your design
workspace, locate the segment in
Sequence View and click Hide/Show .
You will see a red X over the Hide/Show
tool when hidden.
7 To lock one or more segments, click Lock/
Unlock .
For more information, see “Locking
Segments in Sequence View”.
8 To change a segment’s properties in the
Sequence View dialog, click for a
specific segment.
You see the Segment Settings dialog
appear. Make appropriate changes to
segment properties.
9 Close the Sequence View dialog when
finished.
You can also click to expand and
to collapse a color layer.
You can copy and paste segments in
Sequence View. Press Ctrl+C on your
keyboard to copy segments and press
Ctrl+V on your keyboard to paste
segments.
To Next Page
Loading...
