ELNA XPRESSIVE 2 - Changing the Settings of a Segment; Changing Text Properties; Choosing an Embroidery Font

ELNA XPRESSIVE II 75
User’s Guide
Changing the settings
of a segment
In a design window, you can change the
segment settings. For example, you can
adjust the pull-compensation of the segment.
To change the settings of a segment:
1 Open the design.
2 Select View—Sequence View.
You will see the Sequence View dialog
appear.
3 In the Sequence View box, browse to find
the segment you want to change.
4 Double-click the segment you want to
change.
You see the Segment Settings property
pages.
5 Make the necessary adjustments to the
settings.
6 Click OK.
Changing Text
properties
Choosing an embroidery
font
You can choose from a variety of embroidery
fonts. These fonts were digitized specifically
for the embroidery industry and are installed
in the C:\Program Files\Xpressive\Fonts
folder.
Embroidery Fonts
To choose an embroidery font:
1 Create your lettering or select an existing
lettering segment.
2 Press Ctrl+E on your keyboard and
choose Properties from the menu.
You see the Segment Settings property
pages.
3 Click the Text property page.
4 Under Font Type, select Embroidery
Fonts.
5 In the Font list, select an embroidery font.
6 Click OK.
You see the lettering altered accordingly.
To open the Segment Setting property
pages, select the segment and click the
Segment Settings tool on the ribbon
or press Ctrl+E on your keyboard and
choose Properties from the menu.
To open the Segment Setting property
pages, you can also select the segment
and click the Segment Settings tool
on the ribbon or double-click the
segment.