ELNA XPRESSIVE 2 - Page 6

4
Changing the shape of lettering manually........................... 76
Changing the vertical position of lettering ........................... 78
Changing the size and position of circle lettering ................ 79
Rotating lettering manually.................................................. 81
Changing the shape of lettering .......................................... 82
Setting the lettering height................................................... 82
Setting the justification ........................................................ 82
Setting lock stitches for lettering.......................................... 83
Changing Satin properties ......................................................... 84
Selecting a Fill pattern for Satin stitches ............................. 84
Setting the density for Satin stitches ................................... 84
Changing Satin Effect properties ............................................... 85
Applying a jagged effect to Satin stitches............................ 85
Changing Run properties........................................................... 86
Choosing a style for Run stitches........................................ 86
Setting the stitch length for Run stitches ............................. 86
Changing Steil properties........................................................... 87
Setting the width for Steil stitches........................................ 87
Changing Complex Fills properties............................................ 87
Adjusting the stitch length for the selected Fill pattern ........ 87
Selecting a pattern for Fills.................................................. 87
Setting the stitch density for Fills......................................... 88
Changing Carved Fill properties ................................................ 89
Choosing a Carved Tile pattern........................................... 89
Creating Carved Fills........................................................... 89
Changing Programmed Fill properties ....................................... 91
Adjusting the stitch length for Programmed Fill patterns..... 91
Choosing a Programmed Fill pattern................................... 91
Changing Pull Compensation properties ................................... 92
Adjusting pull-compensation ............................................... 92
Changing Underlay properties ................................................... 92
Selecting the underlay type ................................................. 92
Changing the inset distance ................................................ 93
Increasing the number of lines for perpendicular underlay . 93
Specifying the underlay density........................................... 94
Specifying the underlay stitch length................................... 94
Changing Commands properties ............................................... 94
Adding machine commands ................................................ 94
Applying lock stitches .......................................................... 95
Changing a thread color number......................................... 96