3 Local Operation of the Flatpack MCU
12
Operation Guide Flatpack MCU,
351300.013, v8-2006-07
Firmware 402080.009 5v1
Service menu <ServiceOption>
Password= 0003
En
Comm
Protocol Trace *
Comli
9600
Set baud 1200
2400
4800
MODEM sense MODEM sense: ON
MODEM sense: OFF
* “Trace” is for internal factory use
Level 2 Level 3
3.2.1 Hierarchy of Menus
Most menus in Flatpack MCU can be accessed when the
Rectifier system is operated from the keypad of Flatpack
MCU. The hierarchy structure described in this chapter
gives an overview of these menu options.
MCU firmware 402080.009 version 5.1, as shown in this
page, includes the “Language” option, enabling
multilanguage menus in the MCU display
The menu options in MCU firmware 402040.003 version
5.1 and 402080.003 version 5.1 (ROSH English) are
identical to the menu options shown in this page, except
that the “Language” option (in Service menu, Installation
password) is not included.
Level 1
Display in Status Mode
UserOption
ServiceOption
User menu <UserOption>
System ON/OFF Æ Turn system ON/OFF *
Alarm Reset Æ Alarm Reset
NomVolt
BoostVolt
LowBatt1
LowBatt2
VoltageInfo HighBatt1
HighBatt2
LVD 1
LVD 2
LVD 3
DisplayMessages Æ Display messages
Sw Info Æ SwInfo
* The ON/OFF function may be disabled in some
systems
Level 2 Level 3
Firmware 402080.009 5v1
Service menu <ServiceOption>
Password= 0000
NomVolt
BoostVolt
LowBatt1
LowBatt2