3Local Operation of the Flatpack MCU
Operation Guide Flatpack MCU,
351300.013, v8-2006-07
19
3.3.24 Baud rate adjustment (Set baud)
Options:
1200, 2400, 4800 and 9600 baud
For Hierarchy of Menus, see page 12
3.3.25 Modem Sense Selection (MODEM sense)
Options:
-Modem Sense ON
-Modem Sense OFF
If the Modem Sense is set to OFF, the DTR line will be ignored.
This can be chosen when the Flatpack MCU is connected directly to a PC (Winpower Silver/Comli
equipment)
To be able to use a modem with the Flatpack MCU the modem sense must be ON
In order to use certain other devices with the Flatpack MCU, modem sense must be OFF (example, Eltek’s WebPower
adapter).
If not using a modem with Flatpack MCU, it is recommended that modem sense be set to OFF.
For Hierarchy of Menus, see page 12
To Next Page
Loading...
Need help?
General