4 Operating From a Personal Computer
54
Operation Guide Flatpack MCU,
351300.013, v8-2006-07
4.10.4 Battery Boost - Manual Boost
Use the battery boost function, if you need to charge the system batteries faster than normal. The output voltage will
then increase until the boost voltage setting is reached, see chapter Set Levels.
The following conditions can interrupt boost charging:
• the maximum boost time set in Boost duration is reached
• boost charging is interrupted manually
Click the Start-button to commence manual boost charging of system batteries.
This message will appear. Click OK to confirm
To Next Page
Loading...
Need help?
General