Figure 66 Nutbar installation (Left nutbar shown)
The nutbars are not interchangeable. There is a distinct nutbar for the left and right
side. Use part numbers for identification.
Procedure
1. At the front of the rack, align and install the left nutbar (051-000-357) directly
above the rail assembly.
2. Secure the nutbar with two M5 securing screws, one above the top alignment
pin and one below the lower alignment pin.
3. Repeat the previous steps for the right nutbar (051-000-356).
Shelf Installation and Removal
Shelf rail installation in non-EMC racks 73
To Next Page
Loading...