Emerson Affinity - Figure 11-38 SM-I;O 24 V Protected Analog Output Logic Diagram

Safety
Information
Product
Information
Mechanical
Installation
Electrical
Installation
Getting
Started
Basic
parameters
Running
the motor
Optimization
SMARTCARD
operation
PC tools
Advanced
parameters
Technical
Data
Diagnostics
UL Listing
Information
Affinity User Guide 207
Issue Number: 5 www.controltechniques.com
Figure 11-38 SM-I/O 24V Protected analog output logic diagram
SM-I/O 24V Protected parameters
0.XX
0.XX
Key
Read-write (RW)
parameter
Read-only (RO)
parameter
Input
terminals
Output
terminals
The parameters are all shown at their default settings
T12 Analog output 2
T10 Analog output 1
10
Parameter
Range(
Ú) Default(Ö)
Type
x.01 Solutions Module ID 0 to 599 205 RO Uni PT US
x.02
Solutions Module Main Software Version 0.00 to 99.99 RO Uni NC PT
x.03 T5 digital I/O 3 state
OFF (0) or On (1)
RO Bit NC PT
x.04 T6 digital I/O 4 state RO Bit NC PT
x.05 T7 digital input 5 state RO Bit NC PT
x.06 T8 digital input 6 state RO Bit NC PT
x.07 T9 digital input 7 state RO Bit NC PT
x.08 Relay 1 state RO Bit NC PT
x.09 T3 digital I/O 1 state RO Bit NC PT
x.10 T4 digital I/O 2 state RO Bit NC PT
x.11 T3 digital I/O 1 invert
OFF (0)
RW Bit US
x.12 T4 digital I/O 2 invert RW Bit US
x.13 T5 digital I/O 3 invert RW Bit US
x.14 T6 digital I/O 4 invert RW Bit US
x.15
T7 digital input 5 invert RW Bit US
x.16
T8 digital input 6 invert RW Bit US
x.17
T9 digital input 7 invert RW Bit US
x.18 Relay 1 invert RW Bit US
x.20 Digital I/O read word 0 to 255
RO Uni NC PT
x.21 T3 digital I/O 1 source/destination
Pr 0.00 to Pr 50.99 Pr 0.00
RW Uni DE US
x.22 T4 digital I/O 2 source/destination RW Uni DE US
x.23 T5 digital I/O 3 source/destination RW Uni DE US
x.24 T6 digital I/O 4 source/destination RW Uni DE US
x.25 T7 digital input 5 destination RW Uni DE US
x.26 T8 digital input 6 destination RW Uni DE US
x.27 T9 digital input 7 destination RW Uni DE US
x.28 Relay 1 source RW Uni US
x.29 T6 digital I/O 4 output select
OFF (0) or On (1)
On (1) RW Bit US
x.31 T3 digital I/O 1 output select
OFF (0)
RW Bit US
x.32 T4 digital I/O 2 output select RW Bit US
x.33 T5 digital I/O 3 output select RW Bit US
x.39 Analog output mode
0-20, 20-0, 4-20, 20-4 0-20 RW Uni US
x.40 Relay 2 state 0.0 or 100.0 %
RO Bit NC PT
x.42 Relay 2 invert OFF (0) or On (1) OFF (0) RW Bit US
x.43 Relay 2 source Pr 0.00 to Pr 50.99 Pr 0.00 RW Uni US
x.45 Analog output 2 scaling 0.000 to 4.000 1.000 RW Uni US
x.47 Analog output 2 source
Pr 0.00 to Pr 50.99 Pr 0.00
RW Uni US
x.48 Analog output 1 source RW Uni US
x.49 Analog output 1 scaling 0.000 to 4.000 1.000 RW Uni US
x.50 Solutions Module error status 0 to 255
RO Uni NC PT
x.51
Solutions Module software sub-version 0 to 99 RO Uni NC PT