Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
Unidrive M702 User Guide 193
Issue Number: 3
11.079 Drive Name Characters 1-4 (-2147483648) to (2147483647) (0) RW Chr PT US
11.080 Drive Name Characters 5-8 (-2147483648) to (2147483647) (0) RW Chr PT US
11.081 Drive Name Characters 9-12 (-2147483648) to (2147483647) (0) RW Chr PT US
11.082 Drive Name Characters 13-16 (-2147483648) to (2147483647) (0) RW Chr PT US
11.084 Drive Mode Open-loop (1), RFC-A (2), RFC-S (3), Regen (4) RO Txt ND NC PT US
11.085 Security Status
None (0), Read-only (1), Status-only (2),
No Access (3)
RO Txt ND NC PT PS
11.086 Menu Access Status Menu 0 (0) or All Menus (1) RO Txt ND NC PT PS
11.090 Keypad Port Serial Address 1 to 16 1 RW Num US
11.091 Additional Identifier Characters 1 (-2147483648) to (2147483647) RO Chr ND NC PT
11.092 Additional Identifier Characters 2 (-2147483648) to (2147483647) RO Chr ND NC PT
11.093 Additional Identifier Characters 3 (-2147483648) to (2147483647) RO Chr ND NC PT
RW Read / Write RO Read only Num Number parameter Bit Bit parameter Txt Text string Bin Binary parameter FI Filtered
ND No default value NC Not copied PT Protected parameter RA Rating dependent US User save PS Power-down save DE Destination
Parameter
Range(
) Default()
Type
OL RFC-A / S OL RFC-A RFC-S
To Next Page
Loading...
