Emerson Unidrive M702 - Cable Ratings

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
Unidrive M702 User Guide 61
Issue Number: 3
Ensure cables used suit local wiring regulations.
Table 4-9 Cable ratings (200 V)
The nominal cable sizes below are only a guide. The mounting and grouping of cables affects their current-carrying capacity, in some cases
smaller cables may be acceptable but in other cases a larger cable is required to avoid excessive temperature or voltage drop. Refer to
local wiring regulations for the correct size of cables.
Model
Cable size (IEC)
mm
2
Cable size (UL)
AWG
Input Output Input Output
Nominal Maximum Nominal Maximum Nominal Maximum Nominal Maximum
03200050
1.5
4
1.5
4
14
10
14
10
03200066
03200080
44 12 12
03200106
04200137
6
8
6
8
10
8
10
8
04200185
8 888
05200250
10 10 10 10 8 8 8 8
06200330
16
25
16
25
4
3
4
3
06200440
25 25 3 3
07200610
35
70
35
70
2
1/0
2
1/007200750 11
07200830
70 70 1/0 1/0
08201160
95
2 x 70
95
2 x 70
3/0
2 x 1
3/0
2 x 1
08201320 2 x 70 2 x 70 2 x 1 2 x 1
NOTE
CAUTION