Emerson Unidrive M702 - Menus 15, 16 and 17: Option Module Set-Up; Location of Option Module Slots and Their Corresponding Menu Numbers

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
210 Unidrive M702 User Guide
Issue Number: 3
Figure 11-33 Location of option module slots and their corresponding menu numbers
1. Solutions Module Slot 1 - Menu 15
2. Solutions Module Slot 2 - Menu 16
3. Solutions Module Slot 3 - Menu 17
11.15.1 Parameters common to all categories
The option module ID indicates the type of module that is installed in the corresponding slot. See the relevant option module user guide for more
information regarding the module.
11.15 Menus 15, 16 and 17: Option module set-up
Parameter
Range(
) Default()
Type
mm.001 Module ID 0 to 65535 RO Num ND NC PT
mm.002 Software Version 00.00.00 to 99.99.99 RO Num ND NC PT
mm.003 Hardware Version 0.00 to 99.99 RO Num ND NC PT
mm.004 Serial Number LS
0 to 99999999
RO Num ND NC PT
mm.005 Serial Number MS RO Num ND NC PT
Option module ID Module Category
0 No module installed
209 SI-I/O Automation (I/O Expansion)
304 SI-Applications Plus
Automation (Applications)
310 MCi210
311 MCi200
306 SI-Register
443 SI-PROFIBUS
Fieldbus
447 SI-DeviceNet