Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
192 Unidrive M702 User Guide
Issue Number: 3
11.11 Menu 11: General drive set-up
Parameter
Range(
)Default()
Type
OL RFC-A / S OL RFC-A RFC-S
11.018 Status Mode Parameter 1 0.000 to 59.999 0.000
RW Num
PT US
11.019 Status Mode Parameter 2 0.000 to 59.999 0.000
RW Num
PT US
11.021 Parameter 00.030 Scaling 0.000 to 10.000 1.000 RW Num US
11.022 Parameter Displayed At Power-up 0.000 to 0.080 0.010 RW Num US
11.028 Drive Derivative 0 to 255 RO Num ND NC PT
11.029 Software Version 00.00.00.00 to 99.99.99.99 RO Num ND NC PT
11.030 User Security Code 0 to 2147483647 RW Num ND NC PT US
11.031 User Drive Mode Open-loop (1), RFC-A (2), RFC-S (3), Regen (4) RW Txt ND NC PT
11.032 Maximum Heavy Duty Rating 0.000 to 99999.999 RO Num ND NC PT
11.033 Drive Rated Voltage 200 V (0), 400 V (1), 575 V (2), 690 V (3) RO Txt ND NC PT
11.035 Number Of Power Modules Test -1 to 32 -1 RW Num US
11.036 NV Media Card File Previously Loaded 0 to 999 0 RO Num NC PT
11.037 NV Media Card File Number 0 to 999 0 RW Num
11.038 NV Media Card File Type
None (0), Open-loop (1), RFC-A (2), RFC-S (3),
Regen (4), User Prog (5), Option App (6)
RO Txt ND NC PT
11.039 NV Media Card File Version 0 to 9999 RO Num ND NC PT
11.040 NV Media Card File Checksum -2147483648 to 2147483647 RO Num ND NC PT
11.042 Parameter Cloning None (0), Read (1), Program (2), Auto (3), Boot (4) None (0) RW Txt NC US
11.043 Load Defaults None (0), Standard (1), US (2) None (0) RW Txt NC
11.044 User Security Status
Menu 0 (0), All Menus (1), Read-only Menu 0 (2),
Read-only (3), Status Only (4), No Access (5)
RW Txt ND PT
11.045 Select Motor 2 Parameters Motor 1 (0) or Motor 2 (1) Motor 1 (0) RW Txt US
11.046 Defaults Previously Loaded 0 to 2000 RO Num ND NC PT US
11.047 Onboard User Program: Enable Stop (0) or Run (1) Run (1) RW Txt US
11.048 Onboard User Program: Status -2147483648 to 2147483647 RO Num ND NC PT
11.049 Onboard User Program: Programming Events 0 to 65535 RO Num ND NC PT
11.050 Onboard User Program: Freewheeling Tasks Per Second 0 to 65535 RO Num ND NC PT
11.051 Onboard User Program: Clock Task Time Used 0.0 to 100.0 % RO Num ND NC PT
11.052 Serial Number LS 000000000 to 999999999 RO Num ND NC PT
11.053 Serial Number MS 0 to 999999999 RO Num ND NC PT
11.054 Drive Date Code 0 to 65535 RO Num ND NC PT
11.055 Onboard User Program: Clock Task Scheduled Interval 0 to 262140 ms RO Num ND NC PT
11.056 Option Slot Identifiers
1234 (0), 1243 (1), 1324 (2), 1342 (3), 1423 (4),
1432 (5), 4123 (6),
3124 (7), 4132 (8), 2134 (9), 3142 (10), 2143 (11),
3412 (12), 4312 (13), 2413 (14), 4213 (15), 2314
(16), 3214 (17), 2341 (18), 2431 (19),
3241 (20), 3421 (21), 4231 (22), 4321 (23)
1234 (0) RW Txt PT
11.060 Maximum Rated Current 0.000 to 99999.999
RO Num ND NC PT
11.061 Full Scale Current Kc 0.000 to 99999.999 RO Num ND NC PT
11.063 Product Type 0 to 255
RO Num ND NC PT
11.064 Product Identifier Characters M702 (1295462450) to (2147483647) RO Chr ND NC PT
11.065 Drive Rating And Configuration 0 to 999999999 RO Num ND NC PT
11.066 Power Stage Identifier 0 to 255 RO Num ND NC PT
11.067 Control Board Identifier 0.000 to 65.535 RO Num ND NC PT
11.068 Internal I/O Identifier 0 to 255 RO Num ND NC PT
11.069 Position Feedback Interface Identifier 0 to 255 RO Num ND NC PT
11.070 Core Parameter Database Version 0.00 to 99.99 RO Num ND NC PT
11.071 Number Of Power Modules Detected 0 to 32 RO Num ND NC PT US
11.072 NV Media Card Create Special File 0 to 1 0 RW Num NC
11.073 NV Media Card Size 0 to 100000 RO Num ND NC PT
11.074 NV Media Card Space Left 0 to 100000 RO Num ND NC PT
11.075 NV Media Card Read-only Flag Off (0) or On (1) RO Bit ND NC PT
11.076 NV Media Card Warning Suppression Flag Off (0) or On (1) RO Bit ND NC PT
11.077 NV Media Card File Required Version 0 to 9999 RW Num ND NC PT
To Next Page
Loading...
