Emerson Unidrive M702 - Page 35

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
Unidrive M702 User Guide 35
Issue Number: 3
Figure 3-24 Through panel mounting the size 6 drive
The outer holes plus the hole located in the center of the bracket are to be used for through panel mounting.
Figure 3-25 Through panel mounting the size 7 drive
196 mm (7.72 in)
Ø7.00mm (0.276 in)98 mm (3.86 in)
101 mm (3.98 in)
202 mm (7.95 in)
101 mm (3.98 in)
Radius 1.0 mm
(0.04 in)
Ø5.2 mm (0.20 in)
98 mm (3.86 in)
26.0 mm (1.02 in)
120 mm (4.73 in)
26.0 mm
(1.02 in)
26.0 mm
(1.02 in)
227mm(8.94)
131 mm (5.16 in)
412 mm (16.22 in)
210 mm (8.27 in)
96 mm (3.78 in)
365 mm (14.37 in)
356 mm (14.02 in)
399 mm (15.71)
264 mm (10.39 in)
21 mm (0.83 in)
167 mm (6.58 in)
NOTE
220 mm (8.66 in)
252 mm (9.92 in)
310 mm (12.20 in)
252 mm (9.92 in)
538 mm (21.18 in)
488 mm (19.21 in)
278 mm (10.95 in)
Æ 9mm (0.35 in)
330 mm (12.99 in)
270 mm (10.63 in)
245 mm (9.65 in)
187 mm (7.36 in)
508 mm (20.0 in)
92 mm (3.62 in)