Endress+Hauser Liquicap M FMI51 HART - Operation Options and Controls; Operation Methods Overview

Liquicap M FMI51 HART Operation options
Endress+Hauser 31
6 Operation options
6.1 Overview of operation options
This device can operate with:
• the operating elements at the FEI50H electronic insert
• the display and operating module
• the HART protocol with Commubox FXA195 and FieldCare operating program
6.1.1 Display and operating elements at the FEI50H electronic
insert
1
2
3
4
5
6
4.0 mA
V~
V=
A
-
+
4...20mA
-
+
+ -
1
7
3
5
1 2
A0040485
 11 FEI50H electronic insert
1
Key 
2 Green LED - operational status
3 Mode switch
4 Red LED - fault
5
Key 
6 Current pick-off 4 to 20 mA
Function switch
• 1: Operation
select for normal operation
• 2: Empty calibration
select to set empty calibration
• 3: Full calibration
select to set full calibration
• 4: Measuring modes
select to choose between operation for media that form buildup (e.g. yogurt) or for
media without buildup (e.g. water)