Endress+Hauser Liquicap M FMI51 HART - Submenu: Display

Commissioning Liquicap M FMI51 HART
68 Endress+Hauser
submenu: System parameters
• function: Device information
• subfunction: Device designation
- Liquicap-FMI5x
• subfunction: Serial No.
- ....
• subfunction: EC Serial No.
- xxxxxxxxxxx
• subfunction: Device marking
- FMI51- OrderCode
• function: Device information
• subfunction: Dev. rev
- x
• subfunction: Software version
- V01.zz.zz.zzz
• subfunction: DD version
- xx
• function: Device information
• subfunction: Working hour
- xxxxx h
• subfunction: Current run time
- 000d00h00m
• subfunction: Probe length
• Probe length
- xxx mm
• Sensitivity
- 0.0
7.7.1 Submenu: "Display"
Function: "Language"
Select the language for the display and operating module.
Options:
• English
• Deutsch
• Français
• Español
• Italiano
• Nederlands
Function: "Display format"
The "Display format" refers to how the measured value is displayed.
Subfunction: "Format"
Select the display format for displaying numbers.
Options:
• Decimal
• ft-in-1/16"
Subfunction: "No. of decimals"
Select the number of places after the decimal point for displaying numbers.