Endress+Hauser Liquicap M FMI51 HART - Dry Calibration for Interface Measurement

Liquicap M FMI51 HART Commissioning
Endress+Hauser 73
calculated calibration values can be transmitted to the FEI50H electronic insert via the
display or FieldCare.
Capacitance interface measurement is also suitable for very pronounced emulsion
layers. The emulsion layer average is always measured.
7.9.3 Dry calibration for interface measurement
Calculating the calibration data with CapCalc
1.
Click the "CA" button in the toolbar to start CapCalc.
2.
Click "Activate macros" button.
3.
Click the "Next" button in the top right.