Commissioning Liquicap M FMI51 HART
72 Endress+Hauser
FieldCare supports the following functions:
• configuration of transmitters in online operation
• tank linearization
• loading and saving device data by upload and download
• documentation of the measuring point
Connection options:
HART via Commubox FXA195 and the USB port of a computer.
After reinstalling FieldCare, or by clicking a link in the Help menu, a video can be
activated that explains the possible applications of the program in just a few minutes.
7.9.1 FieldCare
Function scope
FDT-based plant asset management tool from Endress+Hauser. It can configure all smart
field devices in a system and helps you manage them. By using the status information, it is
also a simple but effective way of checking their status and condition.
For additional information about FieldCare, see Operating Instructions BA00027S
and BA00059S
Connection options: HART via Commubox FXA195 and the USB port of a computer
Source for device description files
• www.endress.com → Downloads
• CD–ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
7.9.2 Interface measurement
If there are different media in the container like water and oil, the capacitance values for
"Empty calibration" and "Full calibration" can be calculated.
CapCalc.xls is a capacitance calculation program in FieldCare which can be used to
calculate the calibration values for level measurement and interface measurement.
A0040616
1 Noncoductive medium < 1 µS/cm, DC < 5
2 Emulsion
3 Conductive medium ≥100 µS/cm
The program calculates the calibration values on the basis of the entered data. The secure
functioning of interface measurement can already be determined at this time. The
To Next Page
Loading...