Endress+Hauser Liquiline CA80SI - Page 123

Liquiline System CA80SI Diagnostics and troubleshooting
Endress+Hauser 123
DIAG/Logbooks
Function Options Info
Analyzer data logbooks Data logbooks for the data of the wet-chemical
analyzers
Data logbook SP1
Source of data Read only Displays the measuring channel
Measuring parameter Read only Displays the measuring parameter that is being
recorded
Unit Read only Displays the unit
Show Events are displayed Select a particular event to display more detailed
information.
Go to date User entry
• Go to date
• Time
Use this function to go directly to a specific time
in the list. In this way, you avoid having to scroll
through all the information. The complete list is
always visible, however.
Show plot Graphic display of the
logbook entries
The entries are displayed according to your
settings in the General settings/Logbooks.
Delete all entries Action You can use this to delete all data logbook
entries.
Absorption data logbook
Curve Read only Displays the selected LED
Show Events are displayed Select a particular event to display more detailed
information.
Go to date User entry
• Go to date
• Time
Use this function to go directly to a specific time
in the list. In this way, you avoid having to scroll
through all the information. The complete list is
always visible, however.
Show plot Graphic display of the
logbook entries
The entries are displayed according to your
settings in the General settings/Logbooks.
Delete all entries Action You can delete all the absorption data logbook
entries here.
Raw data logbook
Show Events are displayed Select a particular event to display more detailed
information.
Show plot Graphic display of the
logbook entries
The entries are displayed according to your
settings in the General settings/Logbooks.
Set plotting window
range
Here you can specify the start and end times of
the logbook entries to be displayed graphically.
Plotter begin Selection
• First entry
• Date/Time
Factory setting
First entry
• First entry: Defines the first entry saved in
the logbook as the start time.
• Date/Time: Defines the set date/time as the
start time.
Plotter end Selection
• Last entry
• Date/Time
Factory setting
Last entry
• First entry: Defines the last entry saved in the
logbook as the end time.
• Date/Time: Defines the set date/time as the
end time.
Show plot Graphic display of the
logbook entries
The entries are displayed according to your
settings in the General settings/Logbooks.
Delete all entries Action You can delete all the absorption data logbook
entries here.
Data logbooks Chronological list of the data logbook entries for
sensors