Diagnostics and troubleshooting Liquiline System CA80SI
124 Endress+Hauser
DIAG/Logbooks
Function Options Info
Data logbook 1 ... 8
<Logbook name>
This submenu is available for each data logbook
that you have set up and activated.
Source of data Read only Input or mathematical function is displayed
Measured value Read only Measured value being recorded is displayed
Log time left Read only Display of days, hours and minutes until logbook
is full.
‣
Pay attention to the information on
selecting the memory type in the General
settings/Logbooksmenu.
Show Events are displayed Select a particular event to display more detailed
information.
Go to date User entry
• Go to date
• Time
Use this function to go directly to a specific time
in the list. In this way, you avoid having to scroll
through all the information. The complete list is
always visible, however.
Show plot Graphic display of the
logbook entries
The entries are displayed according to your
settings in the General settings/Logbooks.
Select 2nd plot Select another data
logbook
You can view a second logbook at the same time
as the current one.
Delete all entries Action You can use this to delete all data logbook
entries.
Save logbooks
File format Selection
• CSV
• FDM
‣
Save the logbook in the preferred file
format.
You can then open the saved CSV file on the PC
in MS Excel, for example, and make further edits
here.
1)
. You can import the FDM files into
FieldCare and archive them so that they are
tamper-proof.
All data logbooks
Data logbook SP1
Absorption data logbook
Raw data logbook
Data logbook 1 ... 8
All event logbooks
Calibration logbook
Diagnostic logbook
Analyzer data logbook
Analyzer event logbook
Analyzer calibration
logbook
Configuration logbook
HW version logbook
Version logbook
Action,
commences as soon as the
option is selected
Use this function to save the logbook to an SD
card.
‣
Save the logbook in the preferred file
format. You can then open the saved CSV
file on the PC in MS-Excel, for example, and
make further edits here. You can import the
FDM files into Fieldcare and archive them so
they are tamper-proof.
The file name consists of Logbook ident (Menu/Setup/General settings/Logbooks), an abbreviation for
the logbook and a time stamp.
1) CSV files use international number formats and separators. Therefore they must be imported into MS
Excel as external data with the correct format settings. If you double-click the file to open it, the data are
only displayed correctly if MS Excel is installed with the US country setting.
To Next Page
Loading...
