Endress+Hauser Liquiline CA80SI - Page 82

Operation Liquiline System CA80SI
82 Endress+Hauser
Source of data Measured value
Oxygen (amp.) Selection
• Temperature
• Partial pressure
• Concentration liquid
• Saturation
• Raw value nA
(only Oxygen (amp.))
• Raw value μs
(only Oxygen (opt.))
Oxygen (opt.)
Cond i Selection
• Temperature
• Conductivity
• Resistance
(only Cond c)
• Concentration
(only Cond i and Cond c 4-pol)
Cond c
Disinfection Selection
• Temperature
• Sensor current
• Concentration
ISE Selection
• Temperature
• pH
• Ammonium
• Nitrate
• Potassium
• Chloride
TU/TS Selection
• Temperature
• Turbidity g/l
(only TU/TS)
• Turbidity FNU
(only TU/TS)
• Turbidity Formazine
(only TU)
• Turbidity solid
(only TU)
TU
Nitrate Selection
• Temperature
• NO3
• NO3-N
Ultrasonic interface Selection
• Temperature
• Interface
• Turbidity
SAC Selection
• Temperature
• SAC
• Transm.
• Absorption
• COD
• BOD
Controller 1
Current input 1 ... 3
Selection
• Bipolar
(only for current outputs)
• Unipolar+
• Unipolar-
Controller 2
Temperature 1 ... 3
Mathematical functions All the mathematical functions can also be used as a data source and the calculated
value can be used as the measured value.