Endress+Hauser Proline Promass E 300 - Page 150

Operation Proline Promass E 300 PROFINET
150 Endress+Hauser
Parameter overview with brief description
Parameter Prerequisite Description Selection / User entry /
User interface
Assign channel 1 The Extended HistoROM application
package is available.
Assign process variable to logging
channel.
• Off
• Mass flow
• Volume flow
• Corrected volume flow
*
• Target mass flow
*
• Carrier mass flow
*
• Target volume flow
*
• Carrier volume flow
*
• Target corrected volume
flow
*
• Carrier corrected volume
flow
*
• Density
• Reference density
*
• Reference density
alternative
*
• GSV flow
*
• GSV flow alternative
*
• NSV flow
*
• NSV flow alternative
*
• S&W volume flow
*
• Water cut
*
• Oil density
*
• Water density
*
• Oil mass flow
*
• Water mass flow
*
• Oil volume flow
*
• Water volume flow
*
• Oil corrected volume
flow
*
• Water corrected volume
flow
*
• Concentration
*
• Temperature
• Electronic temperature
• Oscillation frequency 0
• Oscillation amplitude
*
• Frequency fluctuation 0
*
• Oscillation damping 0
*
• Oscillation damping
fluctuation 0
*
• Signal asymmetry
*
• Exciter current 0
*
• HBSI
*
• Current output 1
*
• Current output 2
*
• Current output 3
*
• Current output 4
*
• Pressure
• Application specific
output 1
*
• Index inhomogeneous
medium
• Application specific
output 0
*
• Index suspended
bubbles
*
Assign channel 2 The Extended HistoROM application
package is available.

The software options currently
enabled are displayed in the
Software option overview
parameter.
Assign process variable to logging
channel.
Picklist, see Assign
channel 1 parameter
(→  150)