Endress+Hauser Proline Promass E TB2 HART - Page 60

Commissioning Proline Promass E TB2 HART
60 Endress+Hauser
Parameters Description Selection/
User entry
Factory setting
Value 1 display Select the measured value
shown on the local display.
• None
• Mass flow
• Volume flow
• Corrected volume flow
• Density
• Reference density
• Temperature
• Totalizer 1
• Totalizer 2
• Totalizer 3
• Current output 1
• Current output 2
Mass flow
0% bargraph value 1 Enter the 0% value to be
shown on the bargraph
display for the measured
value 1.
Max. 15-digit floating-point
number with sign
Country-dependent:
• 0 kg/h
• 0 lb/min
100% bargraph value 1 Enter the 100% value to be
shown on the bargraph
display for the measured
value 1.
Max. 15-digit floating-point
number with sign
Depends on country and
nominal diameter
Value 2 display Select the measured value
shown on the local display.
• None
• Mass flow
• Volume flow
• Corrected volume flow
• Density
• Reference density
• Temperature
• Totalizer 1
• Totalizer 2
• Totalizer 3
• Current output 1
• Current output 2
None
Value 3 display Select the measured value
shown on the local display.
• None
• Mass flow
• Volume flow
• Corrected volume flow
• Density
• Reference density
• Temperature
• Totalizer 1
• Totalizer 2
• Totalizer 3
• Current output 1
• Current output 2
None
0% bargraph value 3 Enter the 0% value to be
shown on the bargraph
display for the measured
value 3.
Max. 15-digit floating-point
number with sign
Country-dependent:
• 0 kg/h
• 0 lb/min
100% bargraph value 3 Enter the 100% value to be
shown on the bargraph
display for the measured
value 3.
Max. 15-digit floating-point
number with sign
Depends on country and
nominal diameter