Endress+Hauser Proline Promass E TB2 HART - Configuring the Local Display

Proline Promass E TB2 HART Commissioning
Endress+Hauser 59
10.4.3 Configuring the local display
The Display wizard guides you systematically through all parameters that can configured for
configuring the local display.
Navigation path
"Setup" menu ® Display
Sequence of the wizard
Formatdisplay
Value1display
0%bargraph
value1
100%bargraph
value1
Value2display
Value3display
0%bargraph
value3
100%bargraph
value3
Value4display
Endofwizard
A0013797-EN
å 14 "Display" wizard in the "Setup" menu
Parameter overview with brief description
Parameters
Description Selection/
User entry
Factory setting
Format display Select how the measured
values are shown on the local
display.
• 1 value, max. size
• 1 bargraph + 1 value
• 2 values
• 1 value large + 2 values
• 4 values
1 value, max. size