EnGenius EOC?5610 - Wireless Configuration

Long Range Wireless Access Point / Client Bridge Version 1.0
18
 SpanningTreeStatus:Choosetoenableordisablethespanningtreefeature.
 BridgeHelloTime:Specifythenumberofsecondsforthehellotime.
 BridgeMaxAge:Specifythenumberofsecondsforthemaxage.
 Bridge Forward Delay: Specify the number of seconds for
 the bridge forward
delay.
 Priority:Specifythenumberofsecondsforthepriority.
 ClickontheApplybuttontosavethechanges.



4.4 Wireless
 ClickontheWirelesslink onthenavigation
drop‐down menu. You will then see four
options: wireless network, wireless MAC
filter, WDS link settings, and wireless
advancedsettings.Eachoption is described
below.



4.4.1 WirelessNetwork
 TheWirelessNetworkpageallowsyoutoconfigurethewirelessmode,channel,
SSID,andsecuritysettings.



 WirelessMode:Dependingonthetypeofwirelessclientsthatareconnectedto
thenetwork,youmayselectA,B,G,B/G‐mixedorTurboMode.Ifyouare not