EnGenius EOC?5610 - Log

Long Range Wireless Access Point / Client Bridge Version 1.0
27


 ManuallySetDateandTime:Specifythedateandtime
 AutomaticallyGetDateandTime:Selectthetimezonefromthedropdownlist
andthenspecifytheIPaddressoftheNTPserver.
 ClickontheApplybuttontosavethechanges.


4.5.6 Log
 ClickontheLoglinkundertheManagementmenu.TheLogpagedisplaysalist 
ofeventsthataretriggeredontheEthernetandWirelessinterface.Thislogcan
be referred when an unknown error occurs on the system or when a report
needstobesenttothetechnical
supportdepartmentfordebuggingpurposes.



 Syslog:Choosetoenableordisablethesystemlog.
 LogServer IP Address:SpecifytheIPaddressoftheserverthat willreceivethe
systemlog.
 LocalLog:Choosetoenableordisablethelocallog.
 ClickontheApplybuttontosavethe
changes.