EnGenius EOC?5610 - Backup;Restore Settings, Reset to Factory Default Settings

Long Range Wireless Access Point / Client Bridge Version 1.0
39
 Send SNMP Trap: Specify the IP address of the computer that will receive the
SNMPtraps.
 TrapCommunityName:SpecifythepasswordfortheSNMPtrapcommunity.
 ClickontheApplybuttontosavethechanges.


5.5.3 Backup/Restoresettings,Resettofactorydefaultsettings
 Click on the Backup/Restore Setting link under the Management menu. This
optionisusedtosavethecurrentsettingsofthedeviceinafileonyourlocaldisk
orloadsettingsontothedevicefromalocaldisk.Thisfeatureisveryhandyfor
administrators who have several
 devices that need to be configured with the
samesettings.



 Save a copy of the current settings: Click on the Backup button to save the
currentconfiguration.
 Restore saved settings from a file: Once a file has been backed up, you may
restore it by clicking on the Browse button to select the file, and then the

Restorebutton.
 Reverttofactorydefaultsettings:ClickontheFactoryDefaultSettingsbuttonto
resetthedevicetothedefaultsettings.Pleasewaitwhilethedevicerestartand
thenaccessthedeviceusingthedefaultIPaddress:192.168.1.1


