Long Range Wireless Access Point / Client Bridge Version 1.0
24
4.5.1 Administration
Click on the Administration link under the Management menu. This option
allows you tocreate a username and password for the device. By default, this
device is configured without a user name and password admin. For security
reasons it is highly recommended that you create a new user
name and
password.
Name:Specifyausernameintothefirstfield.
Password:Specifyapasswordintothisfieldandthenre‐typethepasswordinto
theConfirmPasswordfield.
ClickontheApplybuttontosavethechanges.
4.5.2 SNMPSettings
Click on the SNMP Settings link under the Management menu. This option
allowsyoutoassignthecontactdetails,location,andcommunitynameandtrap
settings for SNMP. This is a networking management protocol used to monitor
network‐attacheddevices.SNMPallowsmessages (calledprotocoldataunits)to
be sent
to various parts of a network. Upon receiving these messages, SNMP‐
compatible devices (called agents) return data stored in their Management
InformationBases..
To Next Page
Loading...
