26
Telephone Operating Instructions
To answer a call using preselection:
❖ Press the button next to the indicator showing the calling symbol.
❖ Lift the handset.
❖ You are connected with the caller. The indicator changes to ACTIVE.
The following operations assume that your telephone is programmed for
automatic call pickup. If it is programmed for manual call pickup or preselec-
tion, adjust the procedures accordingly.
To make an inside call:
❖ Lift the handset.
❖ Dial the extension number.
To make an outside call using an EXT button with the Sender-Receiver option not
programmed:
❖ Lift the handset.
❖ Dial the trunk access code.
❖ When you hear CO dial tone, dial the outside number.
To make an outside call using a trunk route button with the Sender-Receiver option not
programmed:
❖ Lift the handset.
❖ Press an idle TRA button. If a trunk is idle, you hear CO dial tone.
❖ Dial the outside number.
If there are no free trunks in the selected route and your telephone is programmed for auto
camp-on, it is automatically camped on the trunk route. Otherwise, the system returns
busy tone, and you can camp on manually.
To make an outside call using an EXT button with the Sender-Receiver option pro-
grammed:
❖ Lift the handset.
❖ Dial the trunk access code. You do not hear CO dial tone. Depending on
programming, you may or may not hear system dial tone.
❖ Dial the outside number, then dial # to indicate the end of dialing, or wait for the
timeout before the system begins to dial the digits.
Making Inside Calls
Making Outside Calls
Without Sender-Receiver
With Sender-Receiver
To Next Page
Loading...