Eon Millennium - Call Transfer; Caller ID Blocking;Unblocking

40
Telephone Operating Instructions
To determine the identity of a parked caller:
❖ Lift the handset.
❖ Dial the Call Park Query access code plus the number of the park zone. The
display shows the identity of the parked caller, if available.
❖ Dial # to answer the call, or hang up to disregard the call, or use the UP and DOWN
arrow keys to scroll through a directory of parked calls.
To transfer a call to another extension, to a trunk, to a hot line, or to a destination specified
in a routing plan:
❖ Press the TRANSFER HOLD button to put the call on hold. The TRANSFER HOLD
button indicator changes to ACTIVE; the button indicator associated with the held
call changes to T-HOLD.
❖ When you hear transfer dial tone, dial the destination number or press a DES
button or trunk button.
❖ Before or after the call is answered, press the RELEASE button or hang up to
complete the transfer. The TRANSFER HOLD button indicator changes to IDLE;
the button indicator associated with the transferred call changes to BUSY or IDLE.
❖ If the called party is busy, does not wish to accept the call, or does not answer,
press the CANCEL button or the button associated with the held call to return to
the calling party.
 1. If you use a DES button to call the destination, the DES button indicator
will monitor the call. If you dial the destination, the TRANSFER HOLD button
indicator will monitor the call.
2. If your telephone is programmed for automatic transfer hold and you use
a button to call the transfer destination, the incoming call will automatically
put on hold when you press the button.
3. If your telephone is in the auto transfer operating mode, your call will be
automatically transferred and your telephone released if the called extension
is idle.
To block your telephone from sending caller ID information:
❖ Lift the handset.
❖ Press the CALLER ID BLOCKING/UNBLOCKING button (the button indicator
changes to BUSY), or dial the Caller ID Blocking access code.
To unblock caller ID:
❖ Lift the handset.
❖ Press the CALLER ID BLOCKING/UNBLOCKING button again (the button indicator
changes to IDLE), or dial the Caller ID Unblocking access code.
Call Transfer
Caller ID Blocking/
Unblocking