53
Telephone Operating Instructions
❖ When you hear system dial tone, dial the digits for the date and day type in the
following order: month (00-12), start day (01-31), end day (01-31), and day
type (0-3).
❖ When you hear confirmation tone, hang up. The LCR SPECIAL DAY button
indicator changes to IDLE.
To cancel LCR special day type:
❖ Lift the handset.
❖ Press the LCR SPECIAL DAY button and dial 0, or dial the LCR Special Day
access code plus 0.
❖ When you hear confirmation tone, hang up.
To join a conference or transfer a held call to a conference:
❖ Lift the handset.
❖ When you hear dial tone, dial the Meet Me Conference access code plus the
conference number.
❖ To transfer a held call to the conference, press the RELEASE button or hang up
when you join the conference.
When the MESSAGE RETRIEVE button indicator indicates ATTENTION, or when you
hear transfer dial tone when you go off-hook, there are one or more messages waiting.
Depending on programming, message waiting indications may appear only
on the button indicators and not on the display module. This is useful if your
telephone has many MSGRB buttons, and you do not want the display
occupied with message waiting information.
To answer a message waiting call:
❖ Lift the handset.
❖ Press the MESSAGE RETRIEVE button, or dial the Message Retrieve access
code. The MESSAGE RETRIEVE button indicator changes to ACTIVE. The
telephone that left the first message is called. You hear ringback tone until the call
is answered.
❖ Hang up when finished. If there are no more messages waiting, the MESSAGE
RETRIEVE button indicator changes to IDLE. If there are other messages waiting,
the MESSAGE RETRIEVE button indicator changes to ATTENTION.
If you press an idle MSGRB button, the system will invoke repertory number
0. This is useful at remote systems in networks configured for centralized
voice mail or when the system is equipped with nonintegrated voice mail.
Meet Me Conference
Message Send/
Message Retrieve
Message Waiting Service
To Next Page
Loading...