Eon Millennium - Automatic Callback; Trunk Auto Camp-On; Answer Hold; Clear Features

42
Telephone Operating Instructions
To set up an automatic callback:
❖ Camp on a busy extension or trunk route.
❖ Hang up. The CAMP-ON button indicator changes to BUSY. The extension button
indicator changes to IDLE; a trunk button indicator changes to BUSY. You can
make and answer other calls while you are camped on.
❖ When your telephone is on-hook and the camped-on extension or a trunk in the
camped-on trunk route becomes idle, your telephone will ring and the extension
or trunk button indicator will change to CALLING.
❖ Answer the call. You are automatically connected to the trunk or ringing telephone.
The CAMP-ON button indicator changes to IDLE; the trunk or extension button
indicator changes to ACTIVE.
If your telephone programmed for auto camp-on and you attempt to access a busy trunk
route, you will be automatically camped on the trunk route. You hear confirmation tone
and the CAMP-ON button indicator changes to BUSY. When a trunk becomes available,
the system will connect the trunk, or ring your telephone and connect the trunk when the
call is answered.
 If your telephone is programmed for sender-receiver operation, the dialed
digits are saved and automatically dialed when the callback is answered.
To answer a camped-on call when active on another call:
❖ Put the first call on hold by pressing the TRANSFER HOLD button. The TRANSFER
HOLD button indicator changes to ACTIVE; the button indicator associated with
the held call changes to T-HOLD.
❖ Following a brief pause, the camped-on call is connected.
❖ To return to the held call without dropping the active call, press the TRANSFER
HOLD button again. The TRANSFER HOLD button indicator changes to T-
HOLD; the extension or trunk button indicator changes to ACTIVE.
To drop the active call and return to the held call, press the CANCEL button.
To transfer the call and release your telephone, hang up or press the RELEASE button.
To set up a conference, press the CONFERENCE HOLD button after you answer the
camped-on call.
To clear any active features:
❖ Lift the handset.
❖ Dial the Clear Features dial access code. Any active features are deactivated and
you hear confirmation tone.
❖ Hang up.
Automatic Callback
Trunk Auto Camp-On
Answer Hold
Clear Features