46
Telephone Operating Instructions
❖ When the call is finished or you no longer need the feature, hang up. The original
COS is restored.
To change a telephone's COS for more than one call:
❖ Dial the COS Change access code, followed by the digit 2.
❖ When you hear system dial tone, dial the COS Change password. If the password
is valid, the telephone’s COS is changed and you hear confirmation tone. Release
is automatic. The new COS will remain in effect until you change or cancel it.
To cancel COS Change and restore the COS assigned to the location:
❖ Dial the COS Change access code, followed by the digit 0.
❖ When you hear system dial tone, dial the COS Change password. If the password
is valid, the telephone's original COS is restored and you hear confirmation tone.
Release is automatic.
You can use Directed Call Pickup (DCP) to answer a park-to-station call, an all call
announce call, a paging access call, or a call to an unattended ringing telephone from
another telephone. The ringing telephone must have a prime extension number.
To answer a park-to-station call:
❖ Lift the handset.
❖ Press the DIRECTED CALL PICKUP button or dial the Directed Call Pickup
access code. The DIRECTED CALL PICKUP button indicator changes to BUSY;
the EXT button indicator changes to ACTIVE.
❖ When you hear system dial tone, dial the extension number of the destination
station. The DIRECTED CALL PICKUP button indicator changes to IDLE; the call
is transferred to your telephone.
To answer an all call announce call:
❖ Lift the handset.
❖ Press the DIRECTED CALL PICKUP button or dial the Directed Call Pickup
access code. The DIRECTED CALL PICKUP button indicator changes to BUSY;
the EXT button indicator changes to ACTIVE. You hear system dial tone.
❖ Dial the All Call Announce access code plus one or more zone numbers. The
DIRECTED CALL PICKUP button indicator changes to IDLE; the call is transferred
to your telephone. A private call is established with the calling party; the call
announcers on the other telephones in the zones are idled.
If the call is to several zones, you can dial any active zone number to answer.
To answer a paging access call:
❖ Lift the handset.
❖ Press the DIRECTED CALL PICKUP button or dial the Directed Call Pickup
access code. The DIRECTED CALL PICKUP button indicator changes to BUSY;
the EXT button indicator changes to ACTIVE.
Directed Call Pickup
To Next Page
Loading...