35
Telephone Operating Instructions
❖ Press the DIRECTED CALL PICKUP button or dial the Directed Call Pickup
access code. The DIRECTED CALL PICKUP button indicator changes to BUSY;
the EXT button indicator changes to ACTIVE. You hear system dial tone.
❖ Dial the All Call Announce access code plus the zone number. The DIRECTED
CALL PICKUP button indicator changes to IDLE; the call is transferred to the
answering telephone and a private two-party call is established. The speakers on
the other telephones in the zones return to their previous state.
If the all call announce call is in several zones, you can dial any active zone
number to answer.
To forward calls from to a specified extension:
❖ Lift the handset.
❖ Press the feature button for the call forward mode you want, or dial the Local Call
Forward access code plus the trailing digit specifying the mode (CFFM = 1,
CFBDA = 2, or CFDA = 3). The selected CALL FORWARD button indicator
changes to ACTIVE. You hear system dial tone.
❖ Dial the prime extension number of the telephone your calls will be forwarded to.
You hear confirmation tone. The selected CALL FORWARD button indicator
changes to BUSY.
To forward calls to an outside destination:
❖ Lift the handset.
❖ Press the CFOS button, or dial the Local Call Forward access code followed by
the digit 4. The CFOS button indicator changes to ACTIVE. You hear system dial
tone.
❖ Dial the system repertory number corresponding to the outside number to which
calls are to be forwarded. You hear system dial tone. The CFOS button indicator
changes to BUSY.
❖ To keep CFOS active until you cancel it, hang up.
❖ To keep CFOS active for a specific time, dial a two-digit number (01 to 60)
representing the time in hours, listen for confirmation tone, and then hang up.
To change the call forward operating mode:
❖ Lift the handset.
❖ Press the feature button for the call forward mode you want, or dial the Local Call
Forward access code plus the trailing digit specifying the mode (CFFM = 1,
CFBDA = 2, or CFDA = 3). The selected CALL FORWARD button indicator
changes to ACTIVE. The button indicator of the previously selected mode
changes to IDLE. You hear system dial tone.
❖ Dial the prime extension number of the telephone your calls will be forwarded to.
Call Forward
Call Forward Outside System
Local Call Forward
To Next Page
Loading...