Eon Millennium - Camp-On; Station Camp-On; Trunk Route Camp-On

41
Telephone Operating Instructions
To camp on a busy extension:
❖ When you hear busy tone, press the CAMP-ON button. The CAMP-ON button
indicator changes to BUSY. Or, press the TRANSFER HOLD or CONFERENCE
HOLD button, and when you hear second dial tone, dial the Camp-On access
code.
❖ You hear confirmation tone. The CAMP-ON button indicator changes to BUSY.
The EXT button indicator continues to indicate ACTIVE. Both you and the camped-
on party may hear a camp-on alerting tone, repeated at timed intervals.
❖ Hang up. The EXT button indicator changes to IDLE. The camp-on tone is
stopped.
❖ When the camped-on telephone becomes idle, your telephone rings.
❖ Answer the call. The EXT button indicator changes to ACTIVE; the CAMP-ON
button indicator changes to IDLE. You hear ringback tone while the system rings
the camped-on station.
To camp a trunk call on a busy extension:
❖ When you hear busy tone, press the CAMP-ON button. The CAMP-ON button
indicator changes to BUSY. Or, press the TRANSFER HOLD or CONFERENCE
HOLD button, and when you hear second dial tone, dial the Camp-On access
code.
❖ You hear confirmation tone. The CAMP-ON button indicator changes to BUSY.
Both you and the camped-on party may hear a camp-on alerting tone, repeated
at timed intervals.
❖ Hang up, or press the RELEASE button. The CAMP-ON button indicator and the
TRA or EXT button indicator change to IDLE. The trunk party may hear the camp-
on alerting tone.
❖ When the camped-on telephone becomes idle, the system rings the telephone.
 1. If the called extension is already camped on, is protected from camp-on,
is in the Do-Not-Disturb mode, or is receiving ROH tone, you hear reorder
tone.
2. If you stay off-hook, the camped-on telephone rings as soon as it
becomes idle, you hear ringback tone, and the trunk stays on hold.
To camp on a busy trunk route:
❖ When you hear busy tone, press the CAMP-ON button. The CAMP-ON button
indicator changes to BUSY. Or, press the TRANSFER HOLD button, and when
you hear transfer dial tone, dial the Camp-On access code. You hear confirmation
tone.
❖ Hang up.
❖ When a trunk becomes available, your telephone rings, and the CAMP-ON button
indicator changes to IDLE.
❖ Answer the call. You hear trunk dial tone.
 If you stay off-hook, you will hear dial tone as soon as a trunk is assigned to
the call.
Camp-On
Station Camp-On
Trunk Route Camp-On