Eon Millennium - Call Park

39
Telephone Operating Instructions
To override a busy station, trunk, or conference in the override mode:
❖ Lift the handset.
❖ Press the busy DES button or dial the busy extension number. The DES button
indicator or EXT button indicator changes to ACTIVE. You and the busy parties
may hear a warning tone. After the warning tone, you hear confirmation tone. A
conference connection is established. You can talk with both parties. All parties
may hear override tone every 10 seconds.
❖ When you hang up, Override is canceled, and the original connection is
reestablished. Your telephone remains in the override operating mode; the
OVERRIDE button indicator continues to show BUSY.
If override is denied for any reason, you hear reorder tone.
To park a call in one specific park zone:
❖ Press an idle CALL PARK button while connected to the calling party, or press the
TRANSFER HOLD button.
❖ When you hear transfer dial tone, dial the Call Park access code plus the number
of the park zone (00-15).
❖ The incoming call's button indicator changes to BUSY. The CALL PARK button
indicator changes to ACTIVE. All other appearances of the PARK button change
to P-HOLD. You hear dial tone as confirmation that the call has been parked.
❖ Hang up. The CALL PARK button indicator changes to P-HOLD.
 If the park zone is not free, you hear busy tone.
To park a call in any park zone:
❖ Press the GENERAL CALL PARK button while connected to the calling party, or
press the TRANSFER HOLD button.
❖ Listen for transfer dial tone, and then dial the Call Park access code plus ✱.
❖ The incoming call's button indicator changes from ACTIVE, to HOLD, to BUSY.
The GENERAL CALL PARK button indicator changes to ACTIVE. The display
shows the zone the call is parked in. Any button appearance of the zone the call
is parked in indicates P-HOLD. You hear dial tone as confirmation that the call has
been parked.
❖ Hang up. The GENERAL CALL PARK button indicator changes to IDLE.
To answer a parked call:
❖ Lift the handset.
❖ Press the CALL PARK button for the park zone, or dial the Call Park Answer
access code plus the number of the park zone (00-15).
❖ You hear confirmation tone. You are automatically connected to the parked call,
and the park zone is freed. The CALL PARK button indicator changes to ACTIVE;
all other appearances of the park button change to IDLE.
Call Park