Eon Millennium - Auto Answer; Auto Transfer; Busy Prime Line Indication

31
Telephone Operating Instructions
To automatically answer a call in either the handset or headset mode:
❖ Press the AUTO ANSWER button. The button indicator changes to ACTIVE.
❖ Calls directed to your telephone when it is idle will ring for the programmed delay
time (0-15 seconds), or, if no delay time is programmed, for the 4-second default
delay time. If you put your telephone in Do Not Disturb mode during the answer
delay time, the call will not be answered.
❖ Depending on programming, both you and the caller may hear confirmation tone.
To turn Auto Answer off, press the AUTO ANSWER button again. The button indicator
changes to IDLE.
To put your telephone in the auto transfer mode:
❖ Press the AUTO TRANSFER button. The AUTO TRANSFER button indicator
changes to BUSY.
❖ Incoming calls will be automatically put on hold when you use a direct extension
selection (DES) button to transfer them. If the called extension is idle, the call is
transferred and your telephone is released.
To take your telephone out of auto transfer mode, press the AUTO TRANSFER button
again. The AUTO TRANSFER button indicator changes to IDLE.
To call a prime extension using the busy prime line indication feature:
❖ Press the BUSY PRIME button to put your telephone in the busy prime line
indication operating mode. The BUSY PRIME button indicator changes to BUSY.
❖ Lift the handset.
❖ Dial a prime extension number. If the target telephone is on-hook, all appearances
of the called extension number will ring as usual. If the target telephone is off-hook,
the BUSY PRIME button indicator changes to ATTENTION; the system returns
busy tone. There is no indication of the call attempt at any appearance of the called
number.
❖ You can either complete or terminate the call.
● To complete the call, press the BUSY PRIME button. You hear ringback tone
and the BUSY PRIME button indicator changes to BUSY. The target tele-
phone receives second call indication, and any other appearances of the
called number ring.
● To terminate the call, hang up.
To transfer a call to a prime extension using the busy prime line indication feature:
❖ Put the incoming call on hold.
❖ Press the BUSY PRIME button. The BUSY PRIME button indicator changes to
BUSY.
Auto Answer
Auto Transfer
Busy Prime Line Indication