38
Telephone Operating Instructions
If break-in is denied, you hear reorder tone.
To put your telephone in the override operating mode:
❖ Press the OVERRIDE button.
❖ The OVERRIDE button indicator changes to BUSY.
To put your telephone in the override operating mode using the dial access code:
❖ Dial the Override access code. You hear system dial tone. The SPEAKER and
OVERRIDE button indicators change to BUSY; the EXT button indicator changes
to ACTIVE.
❖ Press the SPEAKER button to hang up. The EXT and SPEAKER button indicators
change to idle.
To return your telephone from override to the normal operating mode:
❖ Press the OVERRIDE button.
❖ The OVERRIDE button indicator changes to IDLE.
To return your telephone from override to the normal operating mode using the dial
access code:
❖ Dial the Override access code. You hear system dial tone. The EXT button
indicator changes to ACTIVE; the SPEAKER button indicator changes to BUSY;
the OVERRIDE button indicator changes to idle.
❖ Press the SPEAKER button to hang up. The EXT and SPEAKER button indicators
change to IDLE.
To override a busy station, trunk, or conference in the normal operating mode:
❖ When you hear busy tone, press the OVERRIDE button, or press the TRANSFER
HOLD or CONFERENCE HOLD button.
❖ When you hear second dial tone, dial the Override access code. The OVERRIDE
button indicator changes to BUSY. You and the busy parties may hear a warning
tone. After the warning tone, you hear confirmation tone. A conference connection
is established. You can talk with both parties. All parties may hear override tone
every 10 seconds.
❖ When you hang up, Override is canceled, and the original connection is
reestablished. Your telephone remains in the override operating mode; the
OVERRIDE button indicator continues to indicate BUSY.
❖ To exit the override operating mode, press the OVERRIDE button. The OVERRIDE
button indicator changes to idle.
If override is denied for any reason, you hear reorder tone.
Override
To Next Page
Loading...