Epson EB-L25000unl User Manual

b
Select Lens Position, and then press the [ ] button.
c
Select the function you want to perform, then press the [ ]
button.
Function Explanation
Load Memory
Loads the saved memory. When you select a
memory name and press the [
] button, the lens
is automatically adjusted according to the settings
of the selected memory.
Save Memory
Registers current settings in the memory. When
you select a memory name and press the [
]
button, the settings are saved.
Erase Memory
Erases the registered memory. When you select a
memory name and press the [
] button, a
message is displayed. Select Yes, and then press the
[
] button to erase the selected memory.
Rename Memory
Changes the memory name. Select the memory
name you want to change, and then press the [
]
button. Enter the memory name using the soft
keyboard.
s "Soft keyboard operations" p.130
When you have finished, move the cursor over
Finish, and then press the [
] button.
Installing the Projector
36

Epson EB-L25000unl Specifications

General

Brand	Epson
Model	EB-L25000unl
Category	Projector
Language	English