a
You can fine tune the corrected results. Select Quick Corner on the
screen from step 4 to adjust the tilt of the image.
s "Quick Corner" p.57
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Mode Application
Dynamic
The brightest mode. Ideal for prioritizing brightness.
Presentation
Ideal for projecting bright, vivid images.
Cinema
Ideal for enjoying movies.
sRGB
Ideal for projecting a faithful reproduction of the
original.
DICOM SIM
Ideal for projecting X-ray photographs and other
medical images. However, the projector is not a medical
device and cannot be used for medical diagnosis.
Multi-Projection
Ideal for projecting from multiple projectors.
Each time you press the [Color Mode] button on the remote control, the
Color Mode name is displayed on the screen and the Color Mode changes.
a
You can set Color Mode from the Configuration menu.
s Image - Color Mode p.119
Setting the Brightness
Set the brightness for the light source.
a
Press the [Menu] button while projecting.
b
Select Brightness Settings from Settings.
Adjusting Projected Images
67
To Next Page
Loading...
Need help?
General