Epson EB-L25000unl User Manual

Name Function
F
Remote port
Connects the optional remote control cable set and inputs
signals from the remote control. When the remote control
cable is plugged into the Remote port, the remote receiver
on the projector is disabled.
s "Optional Accessories" p.205
G
3G/HD/SD SDI port
Inputs SDI signals from video equipment.
H
Monitor Out SDI port
Connects to an external monitor, and outputs SDI signals
from video equipment being input to the 3G/HD/SD SDI
port.
I
Service port
This is used for batch settings. This port is for control use
and should not normally be used.
s "Batch Setup" p.138
J
HDMI port
Inputs video signals from HDMI compatible video
equipment and computers.
K
Cable holder
Insert the supplied cable clamp here to prevent the HDMI
cable from falling out.
L
DVI-D port
Inputs the computer DVI-D signals.
M
HDBaseT port
Connects a LAN cable to the optional HDBaseT
Transmitter.
s "Connecting an HDBaseT Transmitter" p.47
s "Optional Accessories" p.205
The projector supports Art-Net. When using Art-Net to
control the projector, set Art-Net to On from the Network
menu.
s Network - Others - Art-Net p.135
Name Function
N
LAN port
Connects a LAN cable to connect to a network.
The projector supports Art-Net. When using Art-Net to
control the projector, set Art-Net to On from the Network
menu.
s Network - Others - Art-Net p.135
Control Panel
Name Function
A
[ ] button
Turns the projector on.
B
[t] button
Turns the projector off.
C
Change input buttons
Changes to images from each input port.
s "Switching to the Target Image" p.54
Part Names and Functions
17

Epson EB-L25000unl Specifications

General

Brand	Epson
Model	EB-L25000unl
Category	Projector
Language	English