Epson EB-L25000unl User Manual

b
Select Swap Screens, and then press the [ ] button.
The projected images on the left and right are swapped.
Switching the left and right image sizes
a
Press the [Menu] button during split screen projection.
b
Select Screen Size, and then press the [ ] button.
c
Select the screen size you want to display, and then press the [ ]
button.
The projected images will appear as shown below after setting the screen
size.
Equal Larger Left
Larger Right
a
• You cannot enlarge both the left screen and right screen images at
the same time.
• When one image is enlarged, the other image is reduced.
• Depending on the video signals that are input, the images on the left
and right may not appear to be the same size even if Equal is
set.
Ending the split screen
Perform one of the following operations to end split screen.
• Press the [Esc] button.
• Select Exit Split Screen on the Split Screen Setup screen.
s p.97
Projection Functions
99

Epson EB-L25000unl Specifications

General

Brand	Epson
Model	EB-L25000unl
Category	Projector
Language	English